Coating line
Interested in this production line?
Coating line
Removes excess moisture and loose material before the product moves on.
Storage hopper for the coating powder. Feeds the powder automatically to the dosing screw.
Doses the coating powder accurately to the application shaker.
Applies the coating evenly over the product by vibration.
Filters out excess coating material so it can be reused.
Eyelink conveyor that receives the product after the dryer and carries it away.
Brings the product or process liquid to the right temperature for the coating step.
Supply the air for the air knives. Fully integrated into the line.
Extract steam and warm air above the line and remove it in a controlled way.
Provide safe access to the line for operation, cleaning and maintenance.
Removes excess moisture and loose material before the product moves on.
Storage hopper for the coating powder. Feeds the powder automatically to the dosing screw.
Doses the coating powder accurately to the application shaker.
Applies the coating evenly over the product by vibration.
Filters out excess coating material so it can be reused.
Eyelink conveyor that receives the product after the dryer and carries it away.
Brings the product or process liquid to the right temperature for the coating step.
Supply the air for the air knives. Fully integrated into the line.
Extract steam and warm air above the line and remove it in a controlled way.
Provide safe access to the line for operation, cleaning and maintenance.
Interested in this production line?
Coating line: dry coating applied evenly and economically
After the batter, the product receives its coating. A coating line applies the coating powder evenly, removes the excess and recovers the powder that does not stay on the product. This determines the appearance and quality of the end product, and the consumption of coating material.
The line combines powder dosing, application and dewatering shakers, a drum filter and vapour extraction in one integrated set-up.
Hopper and dosing screw: always the right amount of coating
The coating powder is fed from a storage hopper to the application shaker by a dosing screw. The dosage is precisely adjustable and follows the product flow, so the product receives neither too much nor too little coating.
- Accurate dosing: consistent results at varying capacities
- Enclosed feed: less dust and powder loss
- Easy to clean: quick recipe changes
Application and dewatering shaker
The application shaker spreads the coating evenly over the whole product by vibration, without damage. Immediately afterwards the dewatering shaker removes excess moisture and loose coating material, so the product moves on dry and evenly coated.
Vibration technology is the basis here: gentle on the product, robust in use and with few moving parts.
Drum filter and vapour extraction hoods
Coating material that does not stay on the product is removed from the flow by a drum filter and returned to the circuit. Vapour extraction hoods above the line extract steam and warm air and remove it in a controlled way. The blowers for the air knives are fully integrated into the line.
The result: a clean working environment, lower consumption of coating material and a stable process.
